If you want to improve the performance of your air conditioning system, you need to clean your ac coils. First, remove debris and dirt from the coils by using a coil cleaning brush. If this is not enough, a more thorough cleaning may be required. In any case, you should use a good quality cleaning solution to remove all debris and dirt.
Clean evaporator coils
To clean evaporator coils, start by removing the covers. These covers usually have an ‘V’ profile and are designed to keep dirt and debris off of the coils. Then, use a small brush to scrub the coils to remove dirt and debris. After the coils have been cleaned, you can vacuum them gently to remove any remaining dirt and debris.
Clean evaporator coils at least once a year to ensure efficient air conditioning performance. It’s also essential to change air filters and schedule regular maintenance and inspections. A seasoned HVAC technician can help you perform the job safely and effectively. A few supplies are necessary to clean the coils, such as a no-rinse coil cleaner and rubber gloves.
Dirty coils will reduce the efficiency of your air conditioner and cause high energy bills. They’re also prone to contamination because they’re damp from the dehumidification process. Additionally, a dirty air filter will increase the amount of debris that reaches the coils.
To clean evaporator coils, you can either use a shop vac with a brush attachment or a commercial coil cleaner. A shop vac can be extremely useful in this task, because it doesn’t require rinsing. However, be careful to not damage the fin by using too much force. Also, be sure to dry the fin before applying the coil cleaner.
Clean condenser coils
One of the easiest ways to keep your air conditioner running efficiently is to clean the condenser coils regularly. Even if they seem clean, they can still be clogged with dirt and grease. Regardless of the season, it is best to clean them at least once a year and twice if you use your air conditioner year-round.
Before you begin cleaning your condenser coils, make sure you have an inspection tool and a flashlight. Most coils have a thin layer of dirt, so it is crucial that you inspect it carefully. A flashlight may not give you a clear view, and you should avoid using one with a foam tip. Instead, you should make use of a condenser coil cleaner with a fine tip.
In addition to checking the condition of the coil, you should also look at the coil thickness and direction of airflow. To clean these coils, you can either use compressed gas or water to remove dust and grease. Alternatively, you can use chemicals to clean the condenser coils, but keep in mind that chemical cleaning requires multiple cycles and is very messy.
It is essential to clean the condenser coils regularly to prevent refrigerator problems. Dirty condenser coils will cause the compressor to work harder, and will end up causing more repairs and higher utility bills. If you can spare a few minutes each month to clean the coils, you can help your refrigerator run more efficiently and last longer.